Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 5 subscribers
  • Views 1030 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco drop connection to UTM

Goldy_01

Hi all.
Lately my users start complaining about small drooping of connections every now and then.
We have a new Cisco router (4431) which connected to my ISP in one port, and to my UTM in the other port.
the UTM is a soft release on a Dell server with 8 ports.
While pinging from the Cisco to the UTM I'm getting some ping drops:

Mm-Router#ping 90.118.21.10 repeat 20
Type escape sequence to abort.
Sending 20, 1000-byte ICMP Echos to 80.18.221.2, timeout is 2 seconds:
!!!!!!!!!!.!!!!!!!!!
Success rate is 95 percent (19/20), round-trip min/avg/max = 1/1/1 ms

Vice versa is OK.
Intrusion Prevention is off, and ICMP enable.

Any idea?

Thanks
Goldy



This thread was automatically locked due to age.
Parents
  • 0

    Before you install the cisco router all was ok?

    Which device do you replaced?

    Possible there are port settings configured before (speed/duplex)?

    Try to download a big file .. is the speed as expected?

    ftp.astaro.com/.../


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    Before you install the cisco router all was ok?

    Which device do you replaced?

    Possible there are port settings configured before (speed/duplex)?

    Try to download a big file .. is the speed as expected?

    ftp.astaro.com/.../


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Unfiltered HTML