[NUTM-9877] Configurable RADIUS timeout for L2TP over IPsec - Where is this setting?

Question

Hello, 
 
 I have searched high and low through the UTM web pages, but I can not find where this setting is configurable? The only way is still in the backend. 
 
 Perhaps the UTM interface wasn't updated to accommodate this? 
 
 Usually you would edit the default setting template:

vi /var/sec/chroot-ipsec/etc/radiusclient/radiusclient.conf-default radius_timeout 
 
 and then it would set the setting in 
 
 vi /var/sec/chroot-ipsec/etc/radiusclient/radiusclient.conf

FloSupport · Answer

Hi All, 
 To follow up with this thread and ID ( NUTM-9877 ). 
 The RADIUS authentication setting mentioned by BAlfson is the correct setting to configure. 
 Implemented in UTM v9.602, for L2TP over IPsec - the UTM will use the RADIUS server timeout configured. Note: If there is more than one RADIUS server configured on the UTM, the longest timeout that's defined across all the configured servers will be used. 
 Please also see: Sophos UTM: Two-factor authentication with Duo Security 
 Regards,