Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 40 subscribers
  • Views 7263 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Is there a way to add a specify network routing through IPsec tunnel?

ShunzeLee

Dear All,

Is there a way to add a specify network routing through IPsec tunnel?

What I want to do is changing the route of 8.8.8.8 from local wan port to remote IPsec tunnel.

I know the following command, but it didn't work.

system ipsec_route add net <network/netmask> tunnelname <IPsec-TunnelName>

After I run the command on XG, the user can't connect to 8.8.8.8 through IPsec tunnel...

Anyone knows how to do it?
 
Thanks~

 



This thread was automatically locked due to age.
Parents
  • 0

    you mean like setting up a vpn connection and not forcing the user to use the tunnel?  I have learned that you can pretty much only set the source and destinations along with the IPsec profile and then the policy setup in the XG.

Reply
  • 0

    you mean like setting up a vpn connection and not forcing the user to use the tunnel?  I have learned that you can pretty much only set the source and destinations along with the IPsec profile and then the policy setup in the XG.

Children
Unfiltered HTML