Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with Sophos HA

I need help with that's cenario:

HA Active-Passive Configuration ( Preferred primary device flag DISABLED ) :

XG106_A > Initial primary ( initially with license )
XG106_B > Initial auxiliary

At a certain point XG106_A stopped responding and XG106_B became standalone.

After analyzing the XG106_A in an 'isolated' environment, it was necessary to reinstall its latest firmware as it was corrupt.
To reinstall the firmware on the XG106_B device, it was necessary to deactivate HA.

How do I proceed correctly to activate the HA again, will it also be necessary to deactivate it on the XG106_B device? If this is the procedure, initially the license was on the XG106_A, how should I return both devices as primary/secondary?

XG106_B is functional and I cannot lose client environment settings

Thanks



This thread was automatically locked due to age.
Parents Reply Children
  • You can take backup with HA and disable HA and take back again for safter side if you have not taken backup till now.

    Once you disable HA you can re initiate HA as per the guide I have shared.

    Once you enable HA back license will remain on your XG106_B Sophos firewall, if you want to move license you can reboot HA license will migrated to XG106_A Sophos firewall.

    Output after reboot 

    XG106_A > Initial primary ( initially with license )
    XG106_B > Initial auxiliary

    Regards

    "Sophos Partner: Networkkings Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.