VLAN tag on the WAN port using PPPoE ( UFB NZ )

Hi John Mitchell1 Dummy IP configuration is not required as of now with SF OS on the main physical interface and you may directly add the VLAN-based interface with the required zone with the required IP assignment (like Static, DHCP, or PPPoE).

Example: Navigate to Network > Interface > Click on Add Interface > Add VLAN > Fill in the required information and select the required physical port, zone and assignment 

Reference Snapshot:



If the configuration is done as per above then confirming the syslog.log will help to get more info for PPPoE handshake status.

Hi John Mitchell1 Dummy IP configuration is not required as of now with SF OS on the main physical interface and you may directly add the VLAN-based interface with the required zone with the required IP assignment (like Static, DHCP, or PPPoE).

Example: Navigate to Network > Interface > Click on Add Interface > Add VLAN > Fill in the required information and select the required physical port, zone and assignment 

Reference Snapshot:



If the configuration is done as per above then confirming the syslog.log will help to get more info for PPPoE handshake status.

Thank you for your reply,

I tried again this morning and it worked, maybe I was getting a little impatient, it might take my ISP a few minutes to notice a change of router.

Thanks again.