Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Doorbird connected to SOPHOS XG

We want to use a Doorbird (https://www.doorbird.com/de/) doorbell video station, connected to the SOPHOS XG via PoE.
We have created a firewall rule for the Doorbird's IP (Allow all Traffic, LAN to WAN).
Nevertheless, we do not receive any push notifications from the doorbell.
We only get a sound when the app is open on the iPhone, but also no push message.
The bell system is also not marked as online on the manufacturer's side (https://www.doorbird.com/checkonline).
As a test, we connected the system directly to the router via a PoE adapter.
Everything then works and the manufacturer also lists the system as online.
So something is still being blocked by the XG.
Does anyone have any ideas? We found a forum post here that deals with the same problem, but with a UTM (https://community.sophos.com/utm-firewall/f/german-forum/113368/doorbird/406180).

Thanks!



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Did you configure web filtering on your firewall? If yes, it could be the web filtering causing this issue. 

    Try to create a new firewall for the Doorbird's IP address in the source network, and then don’t apply any advanced filtering on the firewall rule. 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Did you configure web filtering on your firewall? If yes, it could be the web filtering causing this issue. 

    Try to create a new firewall for the Doorbird's IP address in the source network, and then don’t apply any advanced filtering on the firewall rule. 

    Thanks,

Children