Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN: Can't access LAN resources

I followed the guide here (https://community.sophos.com/kb/en-us/122769), to the letter (there's an issue with one of the screenshots with regards to IP range but I worked around it).  I used a the same IP ranges and IP addresses.

When I connect, I can't seem to access any machines on the VLAN1.1

VPN Rule:

Log from VPN Client:

 

Any ideas where I can start to troubleshoot this?



This thread was automatically locked due to age.
Parents Reply
  • Hello,

    The problem is that on the "permitted network ressources (IPV4)" you didn't specify your "local subnet" network range. 

    You have to work with host groups and not #port items in the vpn settings, and the same in your firewall rule for the vpn settings.

     

    Try with that and it should work ! 

     

    Regards

    Viken

    XG Certified Architect

    Sophos Gold Partner - Reseller from Lyon, France

Children