Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 1 subscriber
  • Views 5241 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

sophos not enabling device scanning

E_G_R

I have setup a test group of PC's for Device scanning and created a new template that disables removable drives and gives a warning message.  When applied to the test PC's it dosn't work!!!!

There is no mention of it being applied on the Pc's status. :(

:683


This thread was automatically locked due to age.
Parents
  • 0

    Looks like SCF is not installed - no wonder it does not work. As I said, SCF must be selected at installation time (or later installed re-protecting the computers).

    Heck - just found that a handful out of 200+ computers (all with 9.0.2) has device control scanning blank. All (well, most) of them have been automatically upgraded from 7.6 (and all without errors) .... re-protected two of them using SEC and now it's shown as active.  I assume device control did (and does) not work. I'll try to run a test on the others tomorrow whether device control is working or not.

    Christian 

    :725
Reply
  • 0

    Looks like SCF is not installed - no wonder it does not work. As I said, SCF must be selected at installation time (or later installed re-protecting the computers).

    Heck - just found that a handful out of 200+ computers (all with 9.0.2) has device control scanning blank. All (well, most) of them have been automatically upgraded from 7.6 (and all without errors) .... re-protected two of them using SEC and now it's shown as active.  I assume device control did (and does) not work. I'll try to run a test on the others tomorrow whether device control is working or not.

    Christian 

    :725
Children
No Data
Unfiltered HTML