Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 7 subscribers
  • Views 2230 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wiring of laptop used for XG firewall Home Edition

RayGo1975

Okay this is a simple question, or at least I think it is.

How do I plug in the laptop I am using for this software? Do i put the laptop between my cable modem and my router? In the e-mail that I got with my serial number it says:

  1. Connect the WAN interface (port 2) on the device to your internet connection.
  2. Connect a computer to the LAN interface (port 1) 

I think this is written for people who have a firewall appliance which is not my case I am using a laptop.

Thank you for your help.



This thread was automatically locked due to age.
Parents
  • +1

    Hi  

    If you want to use Sophos XG home edition.

    • Intel compatible computer with dual network interfaces. (Any previous OS or files on the computer will be overwritten when installing the XG Firewall Home Edition)
    • Home Edition is limited to 4 cores and 6 GB of RAM. The computer can have more than this, but XG Firewall Home Edition will not be able to utilize it.

    For more details, please refer to the given article- https://www.sophos.com/en-us/products/free-tools/sophos-xg-firewall-home-edition.aspx

    Regards,

    Keyur
    Community Support Engineer | Sophos Support
    Sophos Support Videos | Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'This helped me' link

  • 0 in reply to Keyur

    Thank you Keyur for your help.

    I now know I need to plug one of my network interfaces into my cable modem and the other network interface into my wireless router (switch).

    The only problem is the laptop only has one hardwired network interface. So I purchased a USB to network interface adapter. The problem is that the XG Firewall software (OS) does not see the adapter and goes to Failsave Mode when booted up. I have a CD that came with the adapter that has the drivers on it, how do I load the drivers so I can use the adapter as my second network interface? 

    I am a bit familiar with Linux as I was a UNIX admin at the time I retired. I have tried to find the /dev file for the cdrom so I could mount it but nothing in /dev looks to be a cdrom drive.

    Side note: I know the adapter I bought works for I have plugged it into my windows and Linux laptops and it works just fine.

Reply
  • 0 in reply to Keyur

    Thank you Keyur for your help.

    I now know I need to plug one of my network interfaces into my cable modem and the other network interface into my wireless router (switch).

    The only problem is the laptop only has one hardwired network interface. So I purchased a USB to network interface adapter. The problem is that the XG Firewall software (OS) does not see the adapter and goes to Failsave Mode when booted up. I have a CD that came with the adapter that has the drivers on it, how do I load the drivers so I can use the adapter as my second network interface? 

    I am a bit familiar with Linux as I was a UNIX admin at the time I retired. I have tried to find the /dev file for the cdrom so I could mount it but nothing in /dev looks to be a cdrom drive.

    Side note: I know the adapter I bought works for I have plugged it into my windows and Linux laptops and it works just fine.

Children
No Data
Unfiltered HTML