Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 9 subscribers
  • Views 8410 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem to activate on-access scanning

Mickael Caramel

Hello,

I can not activate the on-access scanning.

Here is how I installed sophos:


Do you accept the licence? Yes(Y)/No(N)
> yes
Where do you want to install Sophos Anti-Virus? [/opt/sophos-av]
>
Warning: There is another installation of Sophos Anti-Virus on this computer.
Do you want to enable on-access scanning? Yes(Y)/No(N)
>
Sophos recommends that you configure Sophos Anti-Virus to auto-update.
It can update either from Sophos directly (requiring username/password details) or from your own server (directory or website (possibly requiring username/password)).
Which type of auto-updating do you want? From Sophos(s)/From own server(o)/None(n) [s]
>
Updating directly from Sophos.
Do you wish to install the Free (f) or Supported (s) version of SAV for Linux? [s]
> f
The Free version of Sophos Anti-Virus for Linux comes with no support.
Forums are available for our free tools at http://openforum.sophos.com/
Do you need a proxy to access Sophos updates? Yes(Y)/No(N)
> no
Fetching free update credentials.
Installing Sophos Anti-Virus....
Selecting appropriate kernel support...
When Sophos Anti-Virus starts, it updates itself to try to find a Sophos kernel interface module update.
This might cause a significant delay.
Sophos Anti-Virus starts after installation.
Installation completed.




Despite this installation, on-scanning is not enabled.





This thread was automatically locked due to age.
Parents
  • 0 
    root@debian:/opt/sophos-av/bin# ./savdstatus 
Sophos Anti-Virus is active


    My friends gets:
     

    root@debian:/opt/sophos-av/bin# ./savdstatus
Sophos Anti-Virus is active and on-access scanning is running
  • 0 in reply to Mickael Caramel

    Hi Mickael, 

    Please check 

    Check that on-access scanning will be started automatically on boot To perform this procedure, you must be logged on to the computer as root.

    1. Check that savd will be started automatically on system boot: chkconfig --list Note: If this command does not work on your Linux distribution, use the appropriate utility to display services that are configured to start on system boot. If the list contains an entry for sav-protect with 2:on, 3:on, 4:on and 5:on, on-access scanning will be started automatically on system boot. Otherwise, type: /opt/sophos-av/bin/savdctl enableOnBoot savd

    2. Check that on-access scanning will be started automatically with savd: /opt/sophos-av/bin/savconfig query EnableOnStart If the command returns true, on-access scanning will be started automatically with savd on system boot. Otherwise, type: /opt/sophos-av/bin/savconfig set EnableOnStart true 3.3 Start on-access scanning To start on-access scanning, do one of the following: ■ Type: /opt/sophos-av/bin/savdctl enable ■ Use the appropriate tool to start the installed service sav-protect. For example, type: /etc/init.d/sav-protect start

    Regards,

    Aditya Patel
    Global Escalation Support Engineer | Sophos Technical Support
    Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts
    If a post solves your question use the 'This helped me' link.

Reply
  • 0 in reply to Mickael Caramel

    Hi Mickael, 

    Please check 

    Check that on-access scanning will be started automatically on boot To perform this procedure, you must be logged on to the computer as root.

    1. Check that savd will be started automatically on system boot: chkconfig --list Note: If this command does not work on your Linux distribution, use the appropriate utility to display services that are configured to start on system boot. If the list contains an entry for sav-protect with 2:on, 3:on, 4:on and 5:on, on-access scanning will be started automatically on system boot. Otherwise, type: /opt/sophos-av/bin/savdctl enableOnBoot savd

    2. Check that on-access scanning will be started automatically with savd: /opt/sophos-av/bin/savconfig query EnableOnStart If the command returns true, on-access scanning will be started automatically with savd on system boot. Otherwise, type: /opt/sophos-av/bin/savconfig set EnableOnStart true 3.3 Start on-access scanning To start on-access scanning, do one of the following: ■ Type: /opt/sophos-av/bin/savdctl enable ■ Use the appropriate tool to start the installed service sav-protect. For example, type: /etc/init.d/sav-protect start

    Regards,

    Aditya Patel
    Global Escalation Support Engineer | Sophos Technical Support
    Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts
    If a post solves your question use the 'This helped me' link.

Children
No Data
Unfiltered HTML