This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cyberoam CR2500iNG-XP BGP Configuration

i need to know how to configure BGP in Cyberoam CR2500iNG-XP and how to make connection stablished, because i did configuration but its not stablished yet. so i need help in this and this is BGP Details:

Router ID: 1.1.1.1    AS:  123456          Network:  102.26.35.0 /22

My End IP: 102.26.35.254/30            ISP End: 102.26.35.253/30

and my ISP Side Configuration BGP:

 neighbor 103.26.35.254 remote-as 123456

 neighbor 103.26.35.254 description link-dsl-stm-1

 neighbor 103.26.35.254 ebgp-multihop 6

 neighbor 103.26.35.254 update-source Loopback51

  neighbor 103.26.35.254 activate

  neighbor 103.26.35.254 soft-reconfiguration inbound

  neighbor 103.26.35.254 route-map STOPUPDATES out

 

i need someone write BGP Configuration in Cyberoam from ISP BGP Configuration they made



This thread was automatically locked due to age.