Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 2542 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can i check if an AP is completely ok?

Revan

Hello,

one of our ap30 have significantly less throughput than the others.

 

Is there a possibility to check the ap?



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    In the Advanced setting of Access Point definition, verify if the Tx rate is set to 100% and try the different channels available. It might be caused due to a congested channel as overlapping can cause performance issues.

    Also, try changing the cable that connects the AP to the UTM.

    Thanks,

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Reply
  • 0

    Hi,

    In the Advanced setting of Access Point definition, verify if the Tx rate is set to 100% and try the different channels available. It might be caused due to a congested channel as overlapping can cause performance issues.

    Also, try changing the cable that connects the AP to the UTM.

    Thanks,

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Children
No Data
Unfiltered HTML