This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM becomes unresponsive while adding more APs or reconfigure wireless network settings

Hi all.

We have a 320 UTM with firmware 9.405-5, one AP30 and two AP15.

Currently, there is a wireless network with WPA2 Enterprise on a Windows Radius and a guest network with Hotspot enabled. Everything working fine.

Now, when we add a new AP (AP55 or AP55C) or when we change some options within the Wireless Protection Section (eg. adding a new wireless network) the UTM becomes unresponsive and the CPU goes up to 100% for about 10 minutes. Web-Proxy connections went away and every RED device that is connected disconnected (timed out).

While connected via SSH to the UTM and reading "top", snort and httpproxy processes are the one with the most %cpu.

Does anybody has an idea what could happend and how I can stop this?

Regards, Christian

This thread was automatically locked due to age.

Parents

0 sachingurung over 8 years ago

Hi Christian,

What do you find in the IPS and http logs? Anything suspicious.

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel
0 cwoller over 8 years ago in reply to sachingurung

Hi sachingurung.

I will investigate this on monday and report back to you :-)

Regards, Christian
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 cwoller over 8 years ago in reply to sachingurung

Hi sachingurung.

I will investigate this on monday and report back to you :-)

Regards, Christian
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data