Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 1 subscriber
  • Views 1028 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wlan2 connect to vlan92

chrizz
Hi,

i got 1 more question.

i got wlan2 working the AP55 is connected to my INTERNAL network
wlan2 is using Multipath to my WAN2


WLAN0(Bridge APLAN)--> via Internal-->UTM-->Wan1
____WLAN2(sep zone)-->via Internal-->UTM-->WAN2
___________________Lan2<>


This thread was automatically locked due to age.
Parents
  • 0
    WebAdmin creates routes between all subnets defined on one of its interfaces, so all you need is firewall rules to allow traffic between two of them.  If you need a masq rule, it's an indication that you have some definitions that violate #3 in Rulz.

    Defining VLAN92 on wlan2 is not necessary if your internal devices don't support that.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    WebAdmin creates routes between all subnets defined on one of its interfaces, so all you need is firewall rules to allow traffic between two of them.  If you need a masq rule, it's an indication that you have some definitions that violate #3 in Rulz.

    Defining VLAN92 on wlan2 is not necessary if your internal devices don't support that.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML