This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 + POE compatible switch

I'm about to pull the trigger on purchasing 2 AP30s to interface with out SG210 UTM.

From the specs I can see that the AP30s are POE 802.3af compliant - does this mean (I don't have much experience in this area) that any POE switch that is also 802.3af compliant will suffice to power the APs?

This thread was automatically locked due to age.

Parents

0 BarryG over 10 years ago

AFAIK yes, but switches have ratings for how much total power they can supply; make sure it's enough for both APs.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 jameshurrell over 10 years ago in reply to BarryG

Thanks Barry.

Yes, I will only have 2 AP30s and from what I can gather with 802.3af this is a max of 15.4w per port. The switch will only be small (5 ports) providing 60w, so it should be enough.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 jameshurrell over 10 years ago in reply to BarryG

Thanks Barry.

Yes, I will only have 2 AP30s and from what I can gather with 802.3af this is a max of 15.4w per port. The switch will only be small (5 ports) providing 60w, so it should be enough.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data