This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Separate VLANs over WiFi

I'm wondering if what I'm trying to do is possible.  I have it set up as it is in the diagram with the exception of the DHCP servers currently being configured on the UTM.

The only issue I'm having is that I get no IP address when connecting to the Guest WiFi network.  I guessing that this is because the AP only lets me configure one VLAN for it, so the requests are coming in on the wrong interface?  How can I make it so that the two SSID's give out different network scopes, while one is bridged to a VLAN?


This thread was automatically locked due to age.
Parents
  • Hi,

    This should work; I've got some of my wifi networks bridged and some not.

    Can you give the Guest WiFi it's own network without using bridging?
    If so, then you need to setup DHCP for that new network.

    Barry
Reply
  • Hi,

    This should work; I've got some of my wifi networks bridged and some not.

    Can you give the Guest WiFi it's own network without using bridging?
    If so, then you need to setup DHCP for that new network.

    Barry
Children
No Data