This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple PSKs for a SSID?

Hello:

I have an application that is "half way" between a hotspot and a single PSK network.

The ideal solution would be to be able to assign a number of PSKs to a single wireless network. 

The concept is a number of contractors need full access to the wireless for an indefinite period of time. However, when one is finished a contract, they would like to remove his key without changing the keys for everyone. (They could then add a new key for a new contractor)

(I think this is termed a "Private Pre Shared Key")

Is there anyway to create a list of PSKs that would be accepted?

(One workaround might be to create multiple hidden SSIDs, one for each contractor but this is a bit too "messy".)

   Tom


This thread was automatically locked due to age.
  • You might want to work with the Hotspot feature and a separate WLAN for your contractors.

    Another solution would be WPA Enterprise with Radius authentication, but that means you would have to run a separate Radius server.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • Scorpionking:

    Good idea! I guess a small Radius server on a Raspberry Pi may work.

    Is there any way to use built in UTM user authentication?

       Tom
  • Tom,

    No, the UTM doesn't have a RADIUS server function.  I believe there's a Feature Request for that though.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA