This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Do AP's function if connection is lost?

IF

you have an Access Point at a remote site over a RED or VPN (using the 1.2.3.4 route)
managed by the UTM at the main site
and you are using SSIDs or zones that Bridge to LAN or Bridge to VLAN (meaning they don't need to tunnel through the UTM),

THEN

will they still continue to function independently even if connection to the UTM is lost?


This thread was automatically locked due to age.
Parents
  • No, I believe that the access points will stop functioning once connection to the UTM is lost.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • No, I believe that the access points will stop functioning once connection to the UTM is lost.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data