Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 2151 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wrong wireless status and some more problems

tomtomtom
Hello,

we recognize some problems with wireless protection. We have 4xAP10 and 1xAP30 Access Points ...

In the wireless status I see some devices from colleagues connected more than 16 hours to the AP30 ... that´s wrong, because my colleagues don´t work so long. Why does the wireless protection does not updates the correct status?

And another problem: I sit next to the AP30, I would say 2 meters away but my iPhone connects to a AP10 which is approximately 20m away. Why?

Only after power cycling the AP30 shows the correct connected devices and I can connect again to the AP.

What can cause that troubles?


Cheers, Tom


This thread was automatically locked due to age.
Parents
  • 0
    I am having similar issues (clients seem to connect to the AP that is farther away sometimes), and also frequently having to reboot APs. Do the APs "talk" to each other in any way to say, "hey I see this client and he is much closer to me, you should service him" -- does enabling the mesh functionality provide this?
  • 0 in reply to luckman212
    Why are you rebooting your APs? How are your APs setup, bridged to lan or on their own network?
    Is your UTM part of an AD using SSO or standalone?
    Mesh only works with AP50s.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to luckman212
    Why are you rebooting your APs? How are your APs setup, bridged to lan or on their own network?
    Is your UTM part of an AD using SSO or standalone?
    Mesh only works with AP50s.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML