Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 2452 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[8.102] Strange outgoing traffic from AP10s to 1.2.3.4 through 2712 port

eclipse79oldacct
Hello, 
I have 5 ap10. From all of them I see strange outgoing traffic TO 1.2.3.4 ip address (it is a real ip not just an invented one) through 2712 destination port.

What is it?!? This port is NOT opened by my packet filter rules... In some situation the outgoing traffic is high. 

see screenshot


This thread was automatically locked due to age.
Parents
  • 0
    Isn't that the port+address the RED uses to do its magic?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Isn't that the port+address the RED uses to do its magic?


    Correct. This is used to setup the control connection between the AP and ASG. Port 2712 is then used to tunnel frames from the AP to the ASG using the RED protocol.

    Helmut
Reply
  • 0 in reply to BAlfson
    Isn't that the port+address the RED uses to do its magic?


    Correct. This is used to setup the control connection between the AP and ASG. Port 2712 is then used to tunnel frames from the AP to the ASG using the RED protocol.

    Helmut
Children
No Data
Unfiltered HTML