Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 100 replies
  • Subscribers 1 subscriber
  • Views 57262 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

URGENT:New ap30 not detected

equintana
Hi,

I have a ASG and this week y purchased a new ap30 device.

I connected this device with a POE inyector. Now, with wireless security enabled and added lan interface, at wireless networks I have the following:

AstaroGuest (on wlan0) [Auto-created by Wireless Security]

But no access point detected.

what is wrong?

regards


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    The ASG fanless device has 3 nic:

    1 lan 192.168.157.x
    1 lan 192.168.158.x
    1 wan static ip internet

    This wan interface is only for ssl vpn and admin propouses

    All http/https proxy traffic and ftp also is re-routed to a  lan 2821 cisco router with 192.168.157.254 router.
Reply
  • 0
    Hi,

    The ASG fanless device has 3 nic:

    1 lan 192.168.157.x
    1 lan 192.168.158.x
    1 wan static ip internet

    This wan interface is only for ssl vpn and admin propouses

    All http/https proxy traffic and ftp also is re-routed to a  lan 2821 cisco router with 192.168.157.254 router.
Children
  • 0 in reply to equintana
    H
    1 lan 192.168.157.x
    1 lan 192.168.158.x
    1 wan static ip internet

    All http/https proxy traffic and ftp also is re-routed to a  lan 2821 cisco router with 192.168.157.254 router.


    Ok, but since the ASG DHCP server for the first lan interface (192.168.157.0) provides a default gateway address of 192.168.157.254, all DHCP clients will directly send their traffic to the cisco router and not to the ASG. And that's why the AP can't find the ASG.
Unfiltered HTML