Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 100 replies
  • Subscribers 1 subscriber
  • Views 57204 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

URGENT:New ap30 not detected

equintana
Hi,

I have a ASG and this week y purchased a new ap30 device.

I connected this device with a POE inyector. Now, with wireless security enabled and added lan interface, at wireless networks I have the following:

AstaroGuest (on wlan0) [Auto-created by Wireless Security]

But no access point detected.

what is wrong?

regards


This thread was automatically locked due to age.
Parents
  • 0
    You have the AP connected to the LAN interface (or the network on the LAN interface), the LAN interface is listed in allowed interfaces under wireless global settings, but the AP is not shown as "pending" under Wireless Security > Access Points?

    Try connecting the AP to a different switch, or directly to the Astaro and see of that lets them communicate.

    Also, check the DHCP scope for the LAN and see if the AP has pulled a DHCP address.
  • 0 in reply to Jack Daniel
    Yes.... allowed lan interface and also dhcp is running and used for lan enviroment.

     At dhcp server I only can see mac address not name.

    Today, Im going to connect directly ap30 and lan interface.
Reply Children
No Data
Unfiltered HTML