Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1432 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Garmin Phenix 6s watch can't use wifi

SalishSwede

I'm having a curious problem with the Garmin Phenix 6s watch.

1. It connects to the network
2. It gets an association per the wireless log:

2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 IEEE 802.11: associated
2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 RADIUS: starting accounting session 5B13D87A-00000008
2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 WPA: pairwise key handshake completed (RSN)
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714830] [wifi0] FWLOG: [106548022] RATE: ChainMask 1, peer_mac e7:d0, phymode 5, ni_flags 0x00201006, vht_mcs_set 0x0000, ht_mcs_set 0x00ff, legacy_rate_set 0x0fff
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714852] [wifi0] FWLOG: [106548022] RTT_REPORT ( 0x2804, 0x3, 0x479, 0x0, 0x9 )
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714884] [wifi0] FWLOG: [106548080] RATE: ChainMask 1, peer_mac e7:d0, phymode 5, ni_flags 0x00201006, vht_mcs_set 0x0000, ht_mcs_set 0x00ff, legacy_rate_set 0x0fff

3. Sends a DNS request to 1.1.1.1 per the logs
4. Nothing else...
5. The wireless log shows a dissociation a few minutes later.

I can find nothing in the Web logs, though I've put it in it's own profile with a transparent setting

The watch says it's can't find a Wireless Network, though clearly it can and has.
There doesn't seem to be any web traffic, though why is a mystery.

Any thoughts?


This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Are you able to see the watch get's the IP address? If yes, when you try to access the internet, please take a packet capture on the watch IP address and check the packetfilter logs. 

    If possible, could you please share the wireless network configuration screenshots? 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Are you able to see the watch get's the IP address? If yes, when you try to access the internet, please take a packet capture on the watch IP address and check the packetfilter logs. 

    If possible, could you please share the wireless network configuration screenshots? 

    Thanks,

Children
No Data
Unfiltered HTML