I'm having a curious problem with the Garmin Phenix 6s watch.
1. It connects to the network
2. It gets an association per the wireless log:
2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 IEEE 802.11: associated
2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 RADIUS: starting accounting session 5B13D87A-00000008
2020:10:28-17:29:40 P110012KQP8G77A hostapd: ath001: STA b4:c2:6a:27:e7:d0 WPA: pairwise key handshake completed (RSN)
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714830] [wifi0] FWLOG: [106548022] RATE: ChainMask 1, peer_mac e7:d0, phymode 5, ni_flags 0x00201006, vht_mcs_set 0x0000, ht_mcs_set 0x00ff, legacy_rate_set 0x0fff
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714852] [wifi0] FWLOG: [106548022] RTT_REPORT ( 0x2804, 0x3, 0x479, 0x0, 0x9 )
2020:10:28-17:29:40 P110012KQP8G77A kernel: [628595.714884] [wifi0] FWLOG: [106548080] RATE: ChainMask 1, peer_mac e7:d0, phymode 5, ni_flags 0x00201006, vht_mcs_set 0x0000, ht_mcs_set 0x00ff, legacy_rate_set 0x0fff
3. Sends a DNS request to 1.1.1.1 per the logs
4. Nothing else...
5. The wireless log shows a dissociation a few minutes later.
I can find nothing in the Web logs, though I've put it in it's own profile with a transparent setting
The watch says it's can't find a Wireless Network, though clearly it can and has.
There doesn't seem to be any web traffic, though why is a mystery.
Any thoughts?
3. Sends a DNS request to 1.1.1.1 per the logs
4. Nothing else...
5. The wireless log shows a dissociation a few minutes later.
I can find nothing in the Web logs, though I've put it in it's own profile with a transparent setting
The watch says it's can't find a Wireless Network, though clearly it can and has.
There doesn't seem to be any web traffic, though why is a mystery.
Any thoughts?
This thread was automatically locked due to age.
