I have some AP55s connected to a XG230.
They are broadcasting 1 SSID, Bridge to AP LAN, with no problems
I would like them to broadcast another SSID (called guest) on a seprate VLAN.
What's the best way to set this up?
I can create the wireless network with no problems
SSID* = guest
Client Traffic = Bridge to VLAN
Bridge to VLAN id* = 2
But when I try to add that 'guest' network and AP to the existing Default Access Point Group, with VLAN Tagging enabled and AP VLAN ID of 2, I get an error.
Btw, both networks are allowed in the single wifi Zone.
Many thanks for any help
This thread was automatically locked due to age.
