This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Http proxy not running - restarted

I've been receiving the error 'Http proxy not running - restarted' about every seven days. I'm thinking it has to be in the configuration as this issue initially began to occur on our UTM 425 and has continued after the migration over to a SG 550. RAM usage on the box will jump up to about 65% before the proxy restarts. My box is running Web protection and network protection. Multiple filtering profiles using a combination of standard proxy and transparent proxy depending on the vlan.

Looking for some guidance on how to begin troubleshooting this one. Thank you.

This thread was automatically locked due to age.

Parents

0 GL@MO over 9 years ago

Will do after i red the topic. I am still on 9.304

EDIT:
cc get settings extra_swap => 1

---
Cancel
Vote Up 0 Vote Down

Cancel
0 kautilya over 9 years ago in reply to GL@MO

Hello,

I have received same error at same time swap usage was high.

Why this Swap Usage Become High ?
Cancel
Vote Up 0 Vote Down

Cancel
0 ChrisEast over 9 years ago in reply to kautilya

I took a chance on the 9.308 soft release and things do seem to be better. Still inside of the 7 day window I was seeing before so it's a little soon to pass final judgement, but after 4 days ram utilization is substantially lower than I have seen post restart in some time.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ChrisEast over 9 years ago in reply to kautilya

I took a chance on the 9.308 soft release and things do seem to be better. Still inside of the 7 day window I was seeing before so it's a little soon to pass final judgement, but after 4 days ram utilization is substantially lower than I have seen post restart in some time.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data