This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

B2BVPN between Sophos SG230 and Juniper SRX4600 route-based VPN

Hi, we tried to create a B2BVPN between Sophos SG230 and Juniper SRX4600 route-based VPN however its failed.
Understand from level one support that our Sophos SG230 UTM 9 doesn't support route-based VPN and it only support policy based VPN setup. Would like to confirm is this correct? any other workaround or alternative?

Thanks in advance.

This thread was automatically locked due to age.

Parents

0 zaphod over 4 years ago

Hi,

that is correct!

Only workaround is with 2 UTM you can use red-tunnel to create a route based "vpn".

with other firewall models no route based ipsec is possible.

i miss this too in utm...

in xg it is possible with v18

greets

zaphod
___________________________________________

Home: Zotac CI321 (8GB RAM / 120GB SSD) with latest Sophos UTM
Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...
Cancel
Vote Up 0 Vote Down

Cancel
0 InformationTechnology over 4 years ago in reply to zaphod

Hi Zaphod, thanks for your reply, meaning our SG UTM are only support Policy base VPN?
Do you managed to find any KB or article mentioned that SG UTM doesn't support Route base VPN?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 InformationTechnology over 4 years ago in reply to zaphod

Hi Zaphod, thanks for your reply, meaning our SG UTM are only support Policy base VPN?
Do you managed to find any KB or article mentioned that SG UTM doesn't support Route base VPN?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 apijnappels over 4 years ago in reply to InformationTechnology

There likely won't be a KB stating what is NOT in UTM.

However in this URL you can see it's a new feature in XG Firewall 18. Therefore don't expect it to ever come to UTM since new features in UTM are very, very rare since Sophos has released XG Firewall

Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 4 years ago in reply to InformationTechnology

Hi and welcome to the UTM Community!

I've never touched a Juniper, so I don't know if this thread about creating a GRE tunnel to a CISCO would be helpful.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel