SSL VPN traffic through a specific WAN

You can chose the Interface the SSL VPN Users will be using under Remote, SSL, Settings. I guess users would need to download the config file once the change was made.

Already tried that, didn't work.

Interesting. I've tried myself and encountered the same issue.

Set the interface-address to ANY, and put the hostname of the desired WAN interface into the "override hostname" field. I just tried this, and the downloaded config now points to the correct line. Not sure if this is the behaviour it should show by design.

Does this work for you?

/edit: unfortunately, this will create an additional route for your users to chose from, as the old one is not updated/overwritten. But this could be by design of the ovpn client.

Unfortunately that didn't work too. I'm thinking maybe set this up through Multi-path Rule?  

Salut Zak,

What do you mean by "didn't work" - what did you do and what did you see?

Cheers - Bob

My bad, it is now working fine after doing what reag suggested the second time around. Thank you guys for the help!

My bad, it is now working fine after doing what reag suggested the second time around. Thank you guys for the help!