This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

installing acc v3 on a Ms virtual pc

Hi all,

a few questions

1) what are the min system reqirements in terms of hdd space and ram to dedicate to this vm

2) specific to ms virtual pc what network settings should i use to allow be able to reach this vm box from my pc (host computer ) and obvoulsy get to the out side world

This thread was automatically locked due to age.

0 rfcat_vk over 12 years ago

Hi,
the requirements are based on how many ASG/UTMs you plan to manage?
1 ASG is not worth it.
2-5 ASGs about 1-1.5gb, 40-60gb of disk and a NIC.
The NIC will need to bridged without NAT.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 crash893 over 12 years ago

thanks for the info Ian!

right now i have 2 but #3 might be on its way

(i mostly want something outside to monitor if the network connection to both sites is up)

the options for MS VM PC network are

1) the card itself
2)shared networking(nat)
3) internal networking
4) no networking (obviously not)
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 12 years ago in reply to crash893

Hi,
l am not sure about which connection type to use?

If you want to use the ACC on your PC, the PC will have to be on 24hrs a day.

Rather than an ACC you could enable network monitoring of links and receive e-mails when the link is restored, which is what you will see using an ACC. You wil need to login to the ACC to see the status.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel