Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 2268 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure ACC on VMWare - Home Environment-

Xfiring
So I was able to get VMWare installed on my Mac Mini in my home environment, the problem is I can't see to get any external connectivity.

My question is how are the Network Adaptors supposed to be setup on the Mini?  

My home environment is setup like this:

External Static IP coming into my house. I have forwarded ports 4433, 4443 (I changed from 4422), and 4444 to the physical device running the VMWare session.  So whenever any traffic comes to my static IP on any of those ports it is routed to my Mac Mini running VMWare ACC 8.003.

I have also created a DNS entry on my domain called accvm.domain.com that points to my static IP address.

I have tested this setup with an Amazon EC2 image and it works fine, so there is something I am missing with the VMWare NICs.  Should they be NAT or Bridge, etc.  If someone could give me a general lesson on how to configure I'd appreciate it.

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    They are both set to bridged.  I setup the internal IP to 192.168.1.15 and assigned the external WAN to my static IP at my house.  I have the forwarded the ports 4422, 4444, (really anything Astaro related) to the physical server that it is on, but that isn't working.

    Maybe I need to port forward to the virtual machine instead?
  • 0 in reply to Xfiring
    Hi,
    you will need to add DNAT rules to get the external traffic to the ACC IP address.
    Then you will need to allow the external "any" to access your ACC in networks.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 EAP

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to Xfiring
    Hi,
    you will need to add DNAT rules to get the external traffic to the ACC IP address.
    Then you will need to allow the external "any" to access your ACC in networks.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 EAP

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML