Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 976 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[1.900] ACC 1.9 Manual [NOTABUG]

thermann
Hello,

i installed the ACC 1.9 in VMWare in our local network for testing. Management of internal Astaro 7.301 is working well. What about connection to other Astaro´s (Homeoffices, branch offices...)? Did we need a IPSEC connection to the remote network? Or works it via SSL? Is connection possible with ACC in internal network and ASG as proxy or did we need an official ip on the ACC or ACC in DMZ?
Is a manual for 1.9 available?
Thank you for the answer.

Regards
Torsten


This thread was automatically locked due to age.
Parents
  • 0
    ACC uses it's own proprietary connection method to remote ASGs (no VPNs necessary)... I believe you just need to DNAT port 4433 from your external IP to the Internal IP of the ACC.  Point the remote ASG unit's at your external IP that's been NATted to the ACC.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BrucekConvergent
    Hi,

    the PDF manuals for the two ACC web interfaces are available via WebAdmin "Support » Manual". Additionally, when you are in the Gateway Manager, you can check section (3) "First Steps" of the Online Help. Here you should find ample information regarding the necessary configuration for your setup.

    Should you need further assistance, please do not hesitate to contact us again.

    Regards,
    Henning
Reply
  • 0 in reply to BrucekConvergent
    Hi,

    the PDF manuals for the two ACC web interfaces are available via WebAdmin "Support » Manual". Additionally, when you are in the Gateway Manager, you can check section (3) "First Steps" of the Online Help. Here you should find ample information regarding the necessary configuration for your setup.

    Should you need further assistance, please do not hesitate to contact us again.

    Regards,
    Henning
Children
No Data
Unfiltered HTML