This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[1.900] ACC 1.9 Manual [NOTABUG]

Hello,

i installed the ACC 1.9 in VMWare in our local network for testing. Management of internal Astaro 7.301 is working well. What about connection to other Astaro´s (Homeoffices, branch offices...)? Did we need a IPSEC connection to the remote network? Or works it via SSL? Is connection possible with ACC in internal network and ASG as proxy or did we need an official ip on the ACC or ACC in DMZ?
Is a manual for 1.9 available?
Thank you for the answer.

Regards
Torsten

This thread was automatically locked due to age.

0 BrucekConvergent over 16 years ago

ACC uses it's own proprietary connection method to remote ASGs (no VPNs necessary)... I believe you just need to DNAT port 4433 from your external IP to the Internal IP of the ACC. Point the remote ASG unit's at your external IP that's been NATted to the ACC.

CTO, Convergent Information Security Solutions, LLC

https://www.convergesecurity.com

Sophos Platinum Partner

--------------------------------------

Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Cancel
Vote Up 0 Vote Down

Cancel
0 megaposer over 16 years ago in reply to BrucekConvergent

Hi,

the PDF manuals for the two ACC web interfaces are available via WebAdmin "Support » Manual". Additionally, when you are in the Gateway Manager, you can check section (3) "First Steps" of the Online Help. Here you should find ample information regarding the necessary configuration for your setup.

Should you need further assistance, please do not hesitate to contact us again.

Regards,
Henning
Cancel
Vote Up 0 Vote Down

Cancel