Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 9003 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT in RED Device

Kris HowsefPenaredondo

Hi,

 

Can network under RED Device natted to the Local LAN of Sophos UTM?

For example

RED Subnet: 172.16.1.0/24

Local: 192.168.1.0/24

Once RED subnet access any sites, it will be natted to a local IP (ex. 192.168.1.5) via SNAT?


Thanks for the response!



This thread was automatically locked due to age.
Parents
  • 0

    Hi Kris,

    I think that is possible via 1:1 NAT because, configuring an SNAT will NAT all the RED source with a single source IP. Hence, if 5 clients jump in from the RED network it will be NATed with a single define IP address in the SNAT policy.

    Try 1:1 NAT and let us know if that works.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • 0 in reply to sachingurung

    Hi Sachin,

    Thanks for the response. One limitation of the setup is that the HQ has limited IPs, hence 1:1 NAT will not be applicable. Just to give you an overview of the setup, there will be 90+ RED devices that will be natted to 1 IP in HQ.  Will SNAT work in this kind of environment?

    Thanks.

Reply Children
No Data
Unfiltered HTML