This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Performance Problems with our RED15

Hello all,

I am Mike and glad to be here to get some help from professionals.

We have 2 SG210 in HA cluster here at our HQ in Germany and one RED15 in our small office in Italy. I configured the RED and now we have the problem that we have no speed between the two sites. I configured the RED as Standard / Unified and the speed was less than 1M. Now I switched to Standard/Split so that the users in Italy have a fast internet connection at least (20M). But the speed between the sites is still that bad.

Internal Network:

172.16.20.0/24

255.255.255.0

Red Network:

172.16.23.0/24

255.255.255.0

Masquerading Rule:

RED15 -> External (WAN)

Maybe you can help to figure the problem out. I will give you all the settings you will asking for :)

Thanks and regards

Mike



This thread was automatically locked due to age.
Parents
  • Change the MTU in the 'Advanced' section of 'Edit Interface'.  I'd be tempted to try this on the reds interface.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Change the MTU in the 'Advanced' section of 'Edit Interface'.  I'd be tempted to try this on the reds interface.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children