Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 4 subscribers
  • Views 11528 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Performance Problems with our RED15

MichaelKuban

Hello all,

I am Mike and glad to be here to get some help from professionals.

We have 2 SG210 in HA cluster here at our HQ in Germany and one RED15 in our small office in Italy. I configured the RED and now we have the problem that we have no speed between the two sites. I configured the RED as Standard / Unified and the speed was less than 1M. Now I switched to Standard/Split so that the users in Italy have a fast internet connection at least (20M). But the speed between the sites is still that bad.

Internal Network:

172.16.20.0/24

255.255.255.0

Red Network:

172.16.23.0/24

255.255.255.0

Masquerading Rule:

RED15 -> External (WAN)

Maybe you can help to figure the problem out. I will give you all the settings you will asking for :)

Thanks and regards

Mike



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to BAlfson

    Thanks for your help Bob, I will go thru the points.

    Thanks for your help also :) I measured it with files download from the internet and with copying from site to site. We have no Linux devices. Is there something to change at the UTM for the MTU sizes? Where can I find it?

    Cheers

Children
No Data
Unfiltered HTML