This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 15 restart loop

Hi@all

we have a customer which have a RED 15, with Verison 9.3502 on a virtuell Appliance. The RED 15 is in a restart loop. When we restart die virtuell UTM than die RED 15 can establish a tunnel. After some Hour we get this error.

Overflow happened on reds3:0
Missing keepalive from reds3:0, disabling peer ....
Received keepalive from reds3:0, enabling peer ....
Overflow happened on reds3:0
Missing keepalive from reds3:0, disabling peer ....
Received keepalive from reds3:0, enabling peer ....
Overflow happened on reds3:0
Missing keepalive from reds3:0, disabling peer ....
Received keepalive from reds3:0, enabling peer ....
Overflow happened on reds3:0
Missing keepalive from reds3:0, disabling peer ....
Received keepalive from reds3:0, enabling peer ....

After a reboot, the tunnel can be established for some hour.
Have someone an idea??

This thread was automatically locked due to age.

0 xapsl over 9 years ago

Hello,

maybe this help:
Overflow happened on RED Device | Network Guy
Cancel
Vote Up 0 Vote Down

Cancel
0 MarcelZimmer over 9 years ago in reply to xapsl

Unfortunately no.

i have tested Standard mode and transparant mode. We have hijacked the RED to our HW UTM and no Problems. Maybe a bug in the SW Appliance??
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 9 years ago

There is no difference between the SW and HW versions except that the hardware version only contains the drivers for the devices on the HW appliance. More likely is the link to Michel's blog above or some other misconfiguration.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel