Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 3877 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Traffic Shape on RED

awesomo
The RED is set to Standard/Split

I have VoIP phones connected to the RED device and they connect to a PBX on the internet. How can I apply shaping to these phones WITHOUT running all traffic through the UTM first?


This thread was automatically locked due to age.
Parents
  • 0
    I don't believe that this is possible even with a RED 50.

    You might consider replacing the RED with an SG105 with a Network Security subscription.  You could either configure a RED tunnel between the two UTMs or go with a classic IPsec site-to-site.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Hello,

    the pbx is NOT on your main/hq, but in the internet, is this correct? Is your regular www-/internettraffic routed via the local router in your branch office or via utm/sg in the hq?
Reply Children
  • 0 in reply to ManuelKarl
    Hello,

    the pbx is NOT on your main/hq, but in the internet, is this correct? Is your regular www-/internettraffic routed via the local router in your branch office or via utm/sg in the hq?


    Yes, it is out on the internet. Yes, internet traffic is routed via the RED in the branch office.
Unfiltered HTML