Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 11151 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 50 will not connect SSL connect accept failed

alanjwells
Hi all,

Having issues with a RED 50 that was swapped out yesterday to replace a RED 10.  I have duplicated the setup of the RED 10 however it will not connect and I am getting the following errors in the log;

2014:11:28-07:44:01 remoteaccess red_server[13827]: Self: SSL connect accept failed because of handshake problems SSL wants a read first

2014:11:28-07:44:32 remoteaccess red_server[13912]: Self: SSL wants a read first

Any help appreciated.


This thread was automatically locked due to age.
Parents
  • 0
    Hi

    I had the same problem with a RED 10. I didn't troubleshoot one item per time so I cannot pin point the fix but here is what I changed and it worked.

    1) Deleted all traces of the RED from the Interfaces / RED Management
    2) Changed my WAN to another ISP (pretty sure this is what fixed it)

    Worked fine afterwards.
Reply
  • 0
    Hi

    I had the same problem with a RED 10. I didn't troubleshoot one item per time so I cannot pin point the fix but here is what I changed and it worked.

    1) Deleted all traces of the RED from the Interfaces / RED Management
    2) Changed my WAN to another ISP (pretty sure this is what fixed it)

    Worked fine afterwards.
Children
No Data
Unfiltered HTML