Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 2105 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 10 - static IP after power outage?

Dozer
Hi there,

I'm deploying a RED 10 to a remote office in eastern Europe.
It has a static IP address.

I've configured it here in the office with DHCP, working fine.
then changed the config to reflect the static IP - config was download and Internet connection failed as I would expect.

Now if I send this over to the remote site... will it power up with the static IP config - it may take 10 days to get there..?

Also, what happens if there is a power outage or an internet outage at the remote site, will the RED revert back to a "blank" setting and attempt to re-download the config using DHCP again ?

Thanks,

Dozer [:S]


This thread was automatically locked due to age.
Parents
  • 0
    Hi dozer and welcome to the Sophos User BB!

    The RED will save its configuration, so there should be no problems after a power outage.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    Hi dozer and welcome to the Sophos User BB!

    The RED will save its configuration, so there should be no problems after a power outage.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
  • 0 in reply to scorpionking
    Hi dozer and welcome to the Sophos User BB!

    The RED will save its configuration, so there should be no problems after a power outage.


    Thanks for that...
    How does the RED box recover from an incorrect static IP setting, or if the end user moves the device to a backup Internet line with a different IP address ?

    It won't be able to connect to the Internet...
    After a certain amount of time does the static IP config revert to a DHCP config? [:S]
Unfiltered HTML