Remote Ethernet Device (RED) Extend local subnet with RED 10

UTM Firewall requires membership for participation - click to join

Thread Info

State Not Answered
Locked Locked
Replies 7 replies
Subscribers 2 subscribers
Views 4314 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Extend local subnet with RED 10

Ben0583 over 10 years ago

Hi,

I have a RED 10 that I want to use to extend an existing local subnet. Is this possible?

Regards,
Ben

This thread was automatically locked due to age.

Parents

0 teched_01 over 10 years ago

I'm understanding "extend an existing local subnet" as you wanting to share 172.16.20.0/24 (as an example) on both the UTM and on the RED. Clients on 172.16.20.0/24 could be connected at the UTM site or the RED site. Is this correct?

The Static/Dynamic address is for the WAN port of the RED.

Sophos RED (Remote Ethernet Device) Technical Training Guide
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 teched_01 over 10 years ago

I'm understanding "extend an existing local subnet" as you wanting to share 172.16.20.0/24 (as an example) on both the UTM and on the RED. Clients on 172.16.20.0/24 could be connected at the UTM site or the RED site. Is this correct?

The Static/Dynamic address is for the WAN port of the RED.

Sophos RED (Remote Ethernet Device) Technical Training Guide
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Ben0583 over 10 years ago in reply to teched_01

Yes, that's correct. Is that possible with Standard/Split?
Cancel
Vote Up 0 Vote Down

Cancel