This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Remote Lan to RED is slow

Hi all, We have had this problem since before I started here. We have a RED 10 at a remote location, ping times from here to the RED are = 2ms, which is fine, however, if I ping to a machine beyond the RED, ping times are from 59 up to 250 ms. Pings from machine to machine in the remote lan are 


This thread was automatically locked due to age.
Parents
  • If the response times are fluctuating that much it usually means your internet access line (at least one of them) is not a very good one.
    When I ping from my UTM-location in Holland to one of our RED10-connected devices in Luxemburg I get responses at about 37ms (with very little deviation). To a server behind another RED10 (In Belgium) the respone is about 26ms (again very little deviation).
    Both RED-locations have corporate DSL connections, while at our main office we have a fiber connection.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • If the response times are fluctuating that much it usually means your internet access line (at least one of them) is not a very good one.
    When I ping from my UTM-location in Holland to one of our RED10-connected devices in Luxemburg I get responses at about 37ms (with very little deviation). To a server behind another RED10 (In Belgium) the respone is about 26ms (again very little deviation).
    Both RED-locations have corporate DSL connections, while at our main office we have a fiber connection.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data