This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

tunnel utm -> utm

I setup i red-connection between 2 utm 9 devices.
The status tells me that the connection is established but no traffic is go from or to the other network
In the red-log I see these lines:
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PING remote_tx=61 local_rx=62 diff=-1
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PONG local_tx=61
I have made firewall-rules to allow traffic between the networks.
I also made Masquerading rules on both sites for the other networks.
What am i doing wrong?

This thread was automatically locked due to age.

Parents

0 BAlfson over 11 years ago

Pieter, please [Go Advanced] and attach pictures, from one side, of the RED interface definition and the Firewall rule allowing traffic to the network on the other side of the tunnel.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 maygyver over 11 years ago in reply to BAlfson

You have to setup a transfer Network and routing.
You have to treat This connection the Same way as a normal cable between Firewalls/Router.

On each Firewall setup a new interface with your RED device as Hardware and select a Transfer Network.

Sven

Astaro user since 2001 - Astaro/Sophos Partner since 2008
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 maygyver over 11 years ago in reply to BAlfson

You have to setup a transfer Network and routing.
You have to treat This connection the Same way as a normal cable between Firewalls/Router.

On each Firewall setup a new interface with your RED device as Hardware and select a Transfer Network.

Sven

Astaro user since 2001 - Astaro/Sophos Partner since 2008
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data