This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

tunnel utm -> utm

I setup i red-connection between 2 utm 9 devices.
The status tells me that the connection is established but no traffic is go from or to the other network
In the red-log I see these lines:
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PING remote_tx=61 local_rx=62 diff=-1 
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PONG local_tx=61 
I have made firewall-rules to allow traffic between the networks.
I also made Masquerading rules on both sites for the other networks.
What am i doing wrong?


This thread was automatically locked due to age.
Parents
  • Pieter, please [Go Advanced] and attach pictures, from one side, of the RED interface definition and the Firewall rule allowing traffic to the network on the other side of the tunnel.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Pieter, please [Go Advanced] and attach pictures, from one side, of the RED interface definition and the Firewall rule allowing traffic to the network on the other side of the tunnel.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • You have to setup a transfer Network and routing.
    You have to treat This connection the Same way as a normal cable between Firewalls/Router.

    On each Firewall setup a new interface with your RED device as Hardware and select a Transfer Network. 

    Sven

    Astaro user since 2001 - Astaro/Sophos Partner since 2008