Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 926 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG with RED

preet
On our ASG i have configured the following

Firewall External Interface
74.30.xx.xx

RED interface reds1
IPv4 address 192.168.10.1

DHCP server
IP range 192.168.10.10-20

Packet filter rule 
Red Address---Any---Any

RED Device Configuration
RED ID: ******x
ASG Hostname : 74.30.xx.xx
Uplink Mode: DHCP
Roting Mode: Split
Split Network: 192.168.5.0 and Red Address

On the remote site i place the RED behind a DSL router which assigns private IP and this i have tested with a laptop.The Red WAN interface connected to DSL router and the WAN link turns green whereas the System blinks red and the other 3 Router,Internet and Tunnel blinks green for few seconds and then goes off and again it keeps blinking and goes off.
Could anyone advice what's going wrong?


This thread was automatically locked due to age.
Parents
  • 0
    That looks like it should work.  Are you sure that the private IP range assigned by the DSL router doesn't conflict with any of your ranges?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    I guess that paketfilterrule

    >Packet filter rule
    >Red Address---Any---Any

    isn't  necessary - maybe it is disturbing.

    I think you need
    RED(Network) -> Any -> Any
    if you want to allow anything from behind the RED.

    Just for safty sake: do you have bound any network definition except 'Internet' to an interface?

    Regards
    Manfred
Reply
  • 0 in reply to BAlfson
    I guess that paketfilterrule

    >Packet filter rule
    >Red Address---Any---Any

    isn't  necessary - maybe it is disturbing.

    I think you need
    RED(Network) -> Any -> Any
    if you want to allow anything from behind the RED.

    Just for safty sake: do you have bound any network definition except 'Internet' to an interface?

    Regards
    Manfred
Children
No Data
Unfiltered HTML