This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connect one RED Device to two different ASGs

Hi,
is it possbile to connect one RED Device to two different ASGs?
I guess not because of the config. But maybe there is some sort of workaround.

Here is what I would like to cset up.
Branch office 1 with RED Device connected to HQ and Branch office 2?

Branch1
Red Device -----HQ
|
|-----------Branch2

Is this possbile?

Thanks
Tobias

This thread was automatically locked due to age.

0 tom_01 over 14 years ago

You'll need two REDs for that. Why not connect branch2 to the HQ as well?
Cancel
Vote Up 0 Vote Down

Cancel
0 T-Roc_01 over 14 years ago in reply to tom_01

Branch 1 and Branch 2 need to be connected because in Branch 1 there is a VoIP telephone system and Branch 2 is using this too. Branch 1 and 2 need to be connected to the HQ because the Terminalserver is in the HQ.

Well, then I guess I have to buy another RED.

Thanks.
Cancel
Vote Up 0 Vote Down

Cancel