Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 4 subscribers
  • Views 6133 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PIM-SM Multicast routing - Can UTM not act as Rendezvous Point?

StevenSteven

Dear Community,

I need to set up PIM-SM routing between two subnets connected to UTM. Am I right in thinking that Sophos UTM 9 does not support to be designated to be the Rendezvous Point?

I have entered one of UTM's IPs in the RP-configuration but it does not appear to work - clients cannot successfully subscribe to a multicast group with the sender being in a different subnet.

Is there any way to get this working without having another PIM router in the network?

Regards,

Steve



This thread was automatically locked due to age.
  • 0

    On the RP Routers tab create a new Rendezvous Point Router

    set the host to one of the UTM's interface addresses. 

    Unfortunately this does not make it the rendezvous point, but seems to allow multicast between interface on the UTM 

     

    The UTM cannot be rendezvous point 

Unfiltered HTML