Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 2 subscribers
  • Views 5176 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.102][BUG]DNAT creates Network Definition

Laue
Hi,

i have created a DNAT Rule (like Szenario 2 : How to Port Forward Service Ports with NAT: Astaro Security Gateway)

After Rule creatation a Service Definition will be created and after each on/off of DNAT rule it will be re-created...

I use UTM 9.1 latest Patch Level.

Any hints? It's very annoying to delete wasted stuff...




This thread was automatically locked due to age.
Parents
  • 0
    9.106-17 with a new 320 box we set up, fresh config with settings manually input.

    DNAT rules would create tons of services/rules despite existing ones being selected during DNAT setup.
  • 0 in reply to InterHmai
    9.106-17 with a new 320 box we set up, fresh config with settings manually input.

    DNAT rules would create tons of services/rules despite existing ones being selected during DNAT setup.


    yeah i'm seing thison a 9.204 box as well it was installed FRESH with 9.200, nat rules that have "automatic FW rule" generate needless service definitions
Reply
  • 0 in reply to InterHmai
    9.106-17 with a new 320 box we set up, fresh config with settings manually input.

    DNAT rules would create tons of services/rules despite existing ones being selected during DNAT setup.


    yeah i'm seing thison a 9.204 box as well it was installed FRESH with 9.200, nat rules that have "automatic FW rule" generate needless service definitions
Children
No Data
Unfiltered HTML