This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG UTM on XCP-ng 7.6 Hypervisor dropping traffic

Looking for suggestions on how to find the cause of tcp communication failures.

 

I have some systems running "behind" a DomU SG UTM Firmware version: 9.714-4 on a XCP-ng 7.6 hypervisor with an AMD Opteron 6220 CPU. Everything works fine. Specifically, my backup software is being NATed through the UTM.

 

When I migrate the UTM to a XCP-ng 7.6 Hypervisor running on an AMD EPYC processor, the same TCP backup traffic drops the connection. The ONLY change is moving the UTM to the new hypervisor.



This thread was automatically locked due to age.
Parents
  • Hey Scott,

    If you see any lines in the UTM firewall log related to the unsuccessful communication, please copy and paste a few here.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hey Scott,

    If you see any lines in the UTM firewall log related to the unsuccessful communication, please copy and paste a few here.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data