Hi, I know this has been posted many times but the answers I found are not working. I cannot going a subnet on a different interface on my UTM. I can ping OTHER subnets, so something tells me it's a setting with this one in particular that's stopping it. The interface is the DMZ, though I'm using it more as a local testing network to set up a new gateway.
The logs say my pings are falling back to fwrule 60002 but I'm not sure why, as I have PING enabled from my LAN to the DMZ. After trying, I downloaded the IPS and Firewall logs and don't see anything even trying to go to the IP I'm attempting to ping. Is there some other place I should be looking?
I can, however, ping it from the UTM itself.
Thanks,
Jeff
Hey Jeff,
You don't need to include "DMZ (Address)" in the rule as that is included with "DMZ (Network)." In addition to inserting a picture of the LAN2 and DMZ interface definitions as Amodin requests, also copy here one of the relevant 60002 lines from thee firewall log.
Cheers - Bob
Thanks all. Go it working now. Yes, it was likely an IP conflict since I my laptop was connected to the management port of the XGS (which is on the DMZ for testing purposes), I also had another connection to the LAN of the XGS, PLUS a wifi connection to my current LAN through the UTM (to which the XGS is also connected so I could test things). Once I disconnected my ethernet<->XGS, only leaving the Management Port active, ping worked.