Management, Networking, Logging and Reporting Scanning with a Device in a different VLAN

UTM Firewall requires membership for participation - click to join

Thread Info

State Verified Answer
Locked Locked
Replies 2 replies
Subscribers 3 subscribers
Views 7841 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Scanning with a Device in a different VLAN

Andreas Czech over 7 years ago

I've a All-in-one Device (Scanner) -> HP OfficeJet 4500

which is located in VLAN A

now I try to scan from a Computer in VLAN B

following the Information from HP for scanning are UDP Port 427 and TCP Ports 9220 and 9500 used.

I created therefore 3 DNAT Rules, but it don't works.

any Idea what I've to change?

This thread was automatically locked due to age.

+1 sachingurung over 7 years ago

Hi Andreas,

Change the DNAT to a Full-NAT. Any help?

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel
0 Andreas Czech over 7 years ago in reply to sachingurung

Hi Saching,

yes, now it works.

I'm stupid, because two were UPD Ports and one an TCP Port which means -> maybe to set the UDP as DNAT and the TCP as SNAT would work too.

therefore wouldn't a Full-NAT needed.

whatever, it works :-)
Cancel
Vote Up 0 Vote Down

Cancel